Custom Colors

 2K Clearcoat CANZ:

THIS CAN NEED TO BE ACTIVATED

Custom Paints brings you 2K Clearcoat in an aerosol can. The 2K aerosol is a brand new design unlike any other aerosol on the market. It's a better design than any other giving high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our 2K Clearcoat CANZ can save on time and labor with no mixing or Spray Gun cleaning. 2K Clearcoat CANZ have good flow giving a great high gloss finish.

2K Clearcoat CANZ is a great product for Vehicle Spot repairs and small jobs that require High Gloss with strength and toughness of an Automotive Clearcoat.

2K Clearcoat CANZ Performance:

• 2-Component Technology (in-can activator system)
• High Gloss providing high scratch resistant
• Spray gun finish
• Quick drying time
• Excellent flow
• Easy polishing
• 24 hour pot life
• Particularly suitable for Vehicle Spot repair

APPLICATION:

• Remove grey cap at base of can and insert metal ring into the pin provided.
• Pull pin fully out and twist 360 degrees to release activator.
• Shake Custom Aerosol Can for 2-5 minutes.
• Apply 2-3 coats of Clearcoat leaving 5-10 minutes between coats.  
• Drying time 30-60 minutes depending on temperature.
• Infrared compatible.
• Can be mechanically polished after 24 hours.
• After use turn aerosol can upside down and empty valve.
• Pot life of up to 24 hours at 20 degrees C / 68 Fahrenheit.

Description:

Base Coatings are now available in an Aerosol can. Base CANZ provide superior coverage and are exceptionally easy to apply. Base colors can be used as a Basecoat with our Custom Range or just as they are.

To get the best result from Base CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Base Colors:

• Black Base
• Blue Lagoon Base 
• Blue Waves Base
• Brown Base
• Dark Blue Base
• Dark Red Base
• Flesh Tone Base
• Fruit Punch Base 
• Green Base
• Lemon Base
• Light Blue Base
• Light Green Base
• Light Grey Base
• Light Purple Base
• Mint Green Base
• Mustard Base
• Orange Base
• Pink Base
• Red Base
• Red Ocher Base
• Sky Blue Base
• Slime Green Base
• White Base
• Yellow Ochre Base

Application:

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake aerosol can for 5-10 minutes.
• Apply 2-3 coats of Base color leaving 5-10 minutes between coats. Leave for 30 minutes before applying any effect color or Clearcoat.
• Apply our 2K Clearcoat CANZ for a Real Deep Gloss finish.

Kustom Canz 1K Primer:

Kustom Canz 1K Primer is a premium primer-surfacer for fast spot priming providing a smooth pin hole free surface easily sanded. Can be used directly onto many difficult substrates including alloy, stainless steel, zintec and galvanize. 

1K Primer Colors:

• Black
• Grey
• White

1K Primer Performance:

• Excellent adhesion and anti-corrosive properties
• Quick Drying-time
• Spray gun finish
• Excellent smooth surface finish
• Particularly suitable for Vehicle Spot Repair

APPLICATION:

• Remove all rust from metal surfaces.
• Clean surface with a suitable degreaser then abrade.
• Areas to be sprayed must be free of grease, dust and dry.
• Shake aerosol can for at least two minutes, after agitator ball is free.
• Carry out test spray before spraying your project.
  
• Apply 1-2 coats wet coats.
• Leave 10-15 minutes between coats.  
• Drying time 30-60 minutes Air Dry at 20C, 3 minutes Infrared. 
• After use, turn aerosol can upside down and spray to clear the valve.

Description:

Alien Glow Coatings are now available in an Aerosol Can. Alien Glow is a glow in the dark paint. This is clearly the best Glow in the Dark paint available with outstanding after glow of up to 24 hours!

To get the best result from Alien Glow CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

CANZ Performance:

• High Performance 1 component Finishes
• Excellent Hardness, Chemical Resistance & Flexibility
• Suitable for use on a wide range of Plastics including HIPS, ABS, ABS/PC, PC, PVC, as well as suitable pre-treated metals
• Ideal as 1 Coat Finishes for a variety of end uses including Automotive, Electronics, Household Goods, etc.
• Used as a Basecoat under 1 & 2 component Clearcoats including Ultra Violet Cured
• Suitable for use with Cubic Printing Process

Alien Glow Colors:

• Blue
• Green

Application:

Alien Glow Coatings are easy to apply and for best results use a White Basecoat.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Can for 5-10 minutes.
• Apply 2-3 coats of Base color leaving 5-10 minutes between coats. Leave for 30 minutes before applying the Alien Glow effect color.
• Apply 3-5 wet coats depending on the Alien Glow effect you desire. Leave 5-10 minutes between coats.
• Apply our 2K Clearcoat CANZ for a Real Deep Gloss finish.

Description:

Military Coatings are now available in an Aerosol Can. Military CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our Military CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

Military colors provide superior coverage and are exceptionally easy to apply.

They can be used as a Basecoat for our Custom Range or just as they are.

To get the best result from Military CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Military Colors:

• Battleship Grey
• Black Shadow 
• Blood Stripe
• Brown Leather
• Dark Tan
• Delta Grey
• Destroyer Grey
• Federal Yellow
• Ghost Grey
• Jungle
• Navy Blue
• Olive Drab
• Sand Dune
• Storm White 
  
• Swamp Green

Application:

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Can for 5-10 minutes.
• Apply 2-3 coats of Military color leaving 5-10 minutes between coats. Leave for 30 minutes before applying the effect color or Clearcoat.
• Apply our 2K Clearcoat CANZ for a Real Deep Gloss finish.