Kustom Canz - Custom Aerosol Cans

Kustom Canz 1K Primer:

Kustom Canz 1K Primer is a premium primer-surfacer for fast spot priming providing a smooth pin hole free surface easily sanded. Can be used directly onto many difficult substrates including alloy, stainless steel, zintec and galvanize. 

1K Primer Colors:

• Black
• Grey
• White

1K Primer Performance:

• Excellent adhesion and anti-corrosive properties
• Quick Drying-time
• Spray gun finish
• Excellent smooth surface finish
• Particularly suitable for Vehicle Spot Repair

APPLICATION:

• Remove all rust from metal surfaces.
• Clean surface with a suitable degreaser then abrade.
• Areas to be sprayed must be free of grease, dust and dry.
• Shake aerosol can for at least two minutes, after agitator ball is free.
• Carry out test spray before spraying your project.
  
• Apply 1-2 coats wet coats.
• Leave 10-15 minutes between coats.  
• Drying time 30-60 minutes Air Dry at 20C, 3 minutes Infrared. 
• After use, turn aerosol can upside down and spray to clear the valve.

 2K Clearcoat CANZ:

THIS CAN NEED TO BE ACTIVATED

Custom Paints brings you 2K Clearcoat in an aerosol can. The 2K aerosol is a brand new design unlike any other aerosol on the market. It's a better design than any other giving high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our 2K Clearcoat CANZ can save on time and labor with no mixing or Spray Gun cleaning. 2K Clearcoat CANZ have good flow giving a great high gloss finish.

2K Clearcoat CANZ is a great product for Vehicle Spot repairs and small jobs that require High Gloss with strength and toughness of an Automotive Clearcoat.

2K Clearcoat CANZ Performance:

• 2-Component Technology (in-can activator system)
• High Gloss providing high scratch resistant
• Spray gun finish
• Quick drying time
• Excellent flow
• Easy polishing
• 24 hour pot life
• Particularly suitable for Vehicle Spot repair

APPLICATION:

• Remove grey cap at base of can and insert metal ring into the pin provided.
• Pull pin fully out and twist 360 degrees to release activator.
• Shake Custom Aerosol Can for 2-5 minutes.
• Apply 2-3 coats of Clearcoat leaving 5-10 minutes between coats.  
• Drying time 30-60 minutes depending on temperature.
• Infrared compatible.
• Can be mechanically polished after 24 hours.
• After use turn aerosol can upside down and empty valve.
• Pot life of up to 24 hours at 20 degrees C / 68 Fahrenheit.

Description:

Base Coatings are now available in an Aerosol can. Base CANZ provide superior coverage and are exceptionally easy to apply. Base colors can be used as a Basecoat with our Custom Range or just as they are.

To get the best result from Base CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Base Colors:

• Black Base
• Blue Lagoon Base 
• Blue Waves Base
• Brown Base
• Dark Blue Base
• Dark Red Base
• Flesh Tone Base
• Fruit Punch Base 
• Green Base
• Lemon Base
• Light Blue Base
• Light Green Base
• Light Grey Base
• Light Purple Base
• Mint Green Base
• Mustard Base
• Orange Base
• Pink Base
• Red Base
• Red Ocher Base
• Sky Blue Base
• Slime Green Base
• White Base
• Yellow Ochre Base

Application:

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake aerosol can for 5-10 minutes.
• Apply 2-3 coats of Base color leaving 5-10 minutes between coats. Leave for 30 minutes before applying any effect color or Clearcoat.
• Apply our 2K Clearcoat CANZ for a Real Deep Gloss finish.

Description:

Base Metallic Coatings are now available in an Aerosol Can. Base Metallic CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our Base Metallic CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

Base Metallics have exceptionally high coverage, are easy to spray and possess high vertical stability with good flow characteristics. They can be simply top coated or used as a Basecoat for our Candy, Liquid, Passion or any of our other effect coatings.

To get the best result from Base Metallic CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Base Metallic Colors:

• Base Metallic Ash Black
• Base Metallic Black
• Base Metallic Blue
• Base Metallic Coral Red
• Base Metallic Dark Gold (Coarse)
• Base Metallic DayDreamer Blue
• Base Metallic Dipsy Blue
• Base Metallic Evergreen
• Base Metallic Gold
• Base Metallic Green
• Base Metallic Grey
• Base Metallic Ice Blue
  
• Base Metallic Kiwi Lightning
• Base Metallic Limoncello
• Base Metallic Mandarin
• Base Metallic Mocha
• Base Metallic Mystic Purple
  
• Base Metallic Purple
• Base Metallic Red
  
• Base Metallic Rose Gold
• Base Metallic Sahara Sand
  
• Base Metallic Silver (Fine)
• Base Metallic Silver (Medium)
• Base Metallic Silver (Coarse)
• Base Metallic Sweet Pea
• Base Metallic Turquoise
• Base Metallic Venetian Red
• Base Metallic Wishful Pinkin

Application:

Base Metallic Coatings are easy to apply. They can be used as a Basecoat for our Custom Range or just simply finish with a Clearcoat.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Can for 3-5 minutes.
• Apply 2-3 coats of Base Metallic color leaving 5-10 minutes between coats. Leave for 60 minutes before applying the effect color or Clearcoat.
• Apply our 2K Clearcoat CANZ for a Real Deep Gloss finish.

Description:

Base Pearlz Coatings are now available in an Aerosol Can. Base Pearlz CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our Base Pearlz CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

Base Pearlz colors have a massive depth of color and a shimmering iridescence that leaves other Basecoats looking lifeless, dull and boring! Our Base Pearlz have an extreme amount of Pearl Luster.

Base Pearlz come in a wide range of colors. They can be simply topcoated or used as a Basecoat for our Candy, Liquid, Passion or any of our other effect coatings.

To get the best result from Base Pearlz CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Base Pearlz Colors:

• Blue Grape - (Best used over White Base)
• Blue Ocean - (Best used over White Base)
• Bondi Beaches - (Best used over Blue Waves Base)
• Champagne Pink - (Best used over White Base)
• Coconut (Best used over Black Base)
• Daytona Beaches - (Best used over Mint Base)
• Fizzy Pink - (Best used over White Base)
  
• Honey - (Best used over White Base)
  
• Hot Salsa - (Best used over White Base)
  
• Key West - (Best used over Blue Waves Base)
  
• Miami Pink - (Best used over Pink Base)
• Novak Purple - (Best used over White Base)
• Orange Fusion - (Best used over White Base)
  
• Oriental Blue - (Best used over White Base)
  
• Peachy King - (Best used over White Base)
• Pineapple - (Best used over White Base)
• Pink Fantasy - (Best used over White Base)
  
• Purple Lust - (Best used over White Base)
• Purple Surfer - (Best used over White Base)
• Purple Velvet - (Best used over White Base)
• Snow White - (Best used over White Base)
  
• Sugar Apple - (Best used over White Base)
• Sunburst - (Best used over White Base)
• Tobago Bay - (Best used over Mint Base)

Application:

Base Pearlz Coatings are easy to apply. For best results, apply over a White Base or Stated Base color. Base Pearlz colors can also be applied over our other Liquid, Spectracoat, Pearl, or Flip Paints to get a real custom effect.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake aerosol can for 5-10 minutes.
• Apply 2-3 coats of Base color leaving 5-10 minutes between coats. Leave for 30 minutes before applying any effect color or Clearcoat.
• Apply our 2K Clearcoat CANZ for a Real Deep Gloss finish.

Description:

SILVER COARSE METALLIC RECOMMENDED AS BASE COLOR!

Candy Coatings are now available in an Aerosol Can. Candy CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our Candy CANZ can save on time and labor with no paint mixing or Spray Gun cleaning. 

Candy brings you the ultimate custom finish. Candy can be applied over any Base Metallic color, but for your own custom color they can be applied over our Pearls, Liquid, Rainbow XL, etc.

To get the best result from Candy CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Candy Colors:

• Black Candy
• Blue Candy
  
• Blueberry Candy
• Brown Candy
• Cherry Candy
• Deep Red Candy
• Emerald Candy
• Fools Gold Candy
• Gold Candy
  
• Green Candy
• Moss Green Candy
  
• Ocean Candy
• Orange Candy
• Red Candy
  
• Ruby Red Candy
  
• Sugar Plum Candy
• Teal Candy
  
• Yellow Candy

Application:

Candy Coatings are easy to apply. For best results, use a Base Metallic Silver but using different colors will give you a real custom effect.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Can for 5 minutes.
• Apply 2-3 coats of Base color leaving 5-10 minutes between coats. Leave for 30 minutes before applying the Candy effect color.
• Apply 3-5 wet coats depending on the Candy effect you desire. Leave 5-10 minutes between coats.
• Apply our 2K Clearcoat CANZ for a Real Deep Gloss finish.

Description:

Chromacoat Coatings are now available in an Aerosol Can. Chromacoat shifting effect changes color right before your eyes. Chromacoat finishes are based on the revolutionary ChromaFlair Color shifting colorants. These are unique colorants that offer previously unattainable color performance, they actually change color depending on the angle from which they are viewed. More than just a subtle variation in shade, the color undergoes an almost magical transformation in appearance. On rounded curved surfaces and sharp angles will highlight the magical appearance of Chromacoat.

To get the best result from Chromacoat CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Chromacoat Colors:

• Chromacoat Autumn Spice - Shifts from Copper Orange - Gold - Green
• Chromacoat Blue - Shifts from Blue - Red - Gold
• Chromacoat Copper - Shifts from Copper- Blue - Purple
• Chromacoat Cyan - Shifts from Cyan - Purple - Gold
  
• Chromacoat Fireball - Shifts from Black - Red - Gold
  
• Chromacoat Flamingo - Shifts from Purple - Pink - Gold - Green
  
• Chromacoat Gold - Shifts From Gold - Silver
• Chromacoat Golden Night - Shifts from Gold - Silver - Blue
• Chromacoat Green - Shifts from Green - Blue - Purple - Gold
• Chromacoat Heather - Shifts from Pinky Purple - Blue - Violet
• Chromacoat Key Lime - Shifts from Gold - Green - Blue - Purple
• Chromacoat Peacock - Shifts from Green - Blue - Purple - Green
• Chromacoat Purple - Shifts from Purple - Green - Violet
• Chromacoat Red - Shifts From Red - Gold
• Chromacoat Silver - Shifts from Silver - Green - Purple
  
• Chromacoat Siren - Shifts from Silver - Green - Blue - Purple
• Chromacoat Smokin Charcoal - Shifts from Dark Purple - Grey - Green - Blue - Violet
• Chromacoat Sunrise - Shifts from Gold - Silver - Purple
• Chromacoat Swift Green - Shifts from Green - Blue
• Chromacoat Voodoo - Shifts from Purple - Green 

Application:

Chromacoat Coatings are easy to apply. For best results, use a Black Basecoat but using different colors will give you a real custom effect. Chromacoat colors can also be applied over our other effects such as Candy, Sparkle Pearl, etc. to get a true custom effect.

• Always spray test panels before spraying your product or project.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)

• Shake Custom Aerosol Can for 3-5 minutes.

• Apply 2-3 coats of Basecoat leaving 5-10 minutes between coats. Leave for 60 minutes before applying the Chromacoat effect color.

• Apply 2-5 coats of Chromacoat depending on the effect you desire. Leave 5-10 minutes between coats.
• Apply our 2K Clearcoat CANZ for a Real Deep Gloss finish.

Description:

Our award winning Liquid is now available in an Aerosol Can. Liquid CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our Liquid CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

The price includes Liquid Color only. This is a Midcoat that requires spraying over a colored Basecoat to achieve the effect you see in the pictures provided. Please take note of colored Basecoat from pictures and purchase the correct Base color from our Base colors.

Liquid custom colors are used to produce color-changing paint (Flip Paint) finishes that range from very subtle to very dramatic. The color of the Basecoat applied under the Midcoat dramatically affects the final color and shift color. Dark colored Basecoats provide the most color change, with light colored Basecoats providing clear and sophisticated pastel and opalescent color shifts. Each Liquid custom product has the potential to produce an infinite number of color shift effects depending on Basecoat color selection.

To get the best result from Liquid CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Liquid Colors:

• Liquid Emerald - Shifts from Green to Blue
• Liquid Purple - Shifts from Purple to Red to Gold to Green

Application:

Liquid Coatings are easy to apply and can even be applied with an airbrush. For best results, use a Black Basecoat but using different colors will give you a real custom effect. Liquid colors can also mixed with our other products Candy, Spectracoat, Sparkle Pearl, Flip Paints, etc.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Can for 5 minutes.
• Apply 2-3 coats of Basecoat leaving 5-10 minutes between coats. Leave for 30 minutes before applying the Liquid effect color.
• Apply 3-4 coats of Liquid depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply our 2K Clearcoat CANZ for a Real Deep Gloss finish.

Description:

Our Flakes are now available in an Aerosol Can. Flake CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our Flake CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

(Pictured is the Large .015 applied over a Black Base coat)

To get the best result from Flake CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Flake Performance:

• High Performance 1 component Finishes
• Excellent Hardness, Chemical Resistance and Flexibility
• Suitable for use on a wide range of Plastics including HIPS, ABS, ABS/PC, PC, PVC, as well as suitable pre-treated metals
• Ideal as 1 Coat Finishes for a variety of end uses including Automotive, Electronics, Household Goods, etc.
• Use as Basecoat under 1 and 2 component Clearcoat including Ultra Violet Cured
• Suitable for use with Cubic Printing Process

Flake Colors:

Our Flakes are the finest grade you can buy. They are ultra thin, easy to smooth out and have outstanding sparkle. Apply our Flakes over any Base color to produce a real custom effect.

Aerosol Can Flake colors are only available in our small size Flake (.004 Hex).

• Black Flake
• Blue Flake
• Blurple Flake
• Bronze Flake
• Clear Flake
• Copper Flake
• Dark Gold Flake
• Deep Blue Flake
• Emerald Flake
• Flame Red Flake
• Fuchsia Flake
• Gold Flake
• Green Flake
• Gunmetal Flake
  
• Orange Flake
  
• Pink Flake
  
• Purple Flake
• Silver Flake
  
• Sky Blue Flake
• Wine Red Flake

Application:

Flake Coatings are easy to apply. For best results, use a Black Basecoat but using different colors will give you a real custom effect. Flake CANZ colors can also be applied over our other Liquid, Spectracoat, Pearl and Flip Paints.

• Always spray test panels before spraying your product or project.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)

• Shake Custom Aerosol Can for 5 minutes.
• Apply 2-3 coats of Base color leaving 5-10 minutes between coats. Leave for 30 minutes before applying the Flake effect.
• Apply 2-5 coats of Flake depending on the effect you desire. Leave 5-10 minutes between coats.
• Apply our 2K Clearcoat CANZ for a Real Deep Gloss finish.

Description:

Crystal Coatings are now available in an Aerosol Can. Crystal CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our Crystal CANZ can save on time and labor with no paint mixing or Spray Gun cleaning. 

Crystal custom colors produce a color-changing paint (Flip Paint) finishes that range from very subtle to very dramatic. The color of the Basecoat applied under the Midcoat dramatically effects the final color and shift color. Dark colored Basecoats provide the most color change with light colored Basecoats providing clear and sophisticated pastel and opalescent color shifts. Each Crystal custom product has the potential to produce an infinite number of color shift effects depending on Basecoat color selection.

To get the best result from Crystal CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

CANZ Performance:

• High Performance 1 component Finishes
• Excellent Hardness, Chemical Resistance & Flexibility
• Suitable for use on a wide range of Plastics including HIPS, ABS, ABS/PC, PC, PVC, as well as suitable pre-treated metals
• Ideal as 1 Coat Finishes for a variety of end uses including Automotive, Electronics, Household Goods, etc.
• Used as Basecoat under 1 & 2 component Clearcoat including Ultra Violet Cured
• Suitable for use with Cubic Printing Process

Crystal Colors:

• Crystal Blue
• Crystal Gold
• Crystal Green

Application:

Crystal Coatings are easy to apply. For best results, use a Black Basecoat but using different colors will give you a real custom effect. Crystal CANZ can also be applied over our other Candy, Spectracoat, Sparkle Pearls, Flip Paints, etc. to get a true custom effect.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Can for 3-5 minutes.
• Apply 2-3 coats of Base color leaving 5-10 minutes between coats. Leave for 30 minutes before applying the Crystal effect color.
• Apply 2-5 coats of Crystal depending on the effect you desire. Leave 5-10 minutes between coats.
• Apply our 2K Clearcoat CANZ for a Real Deep Gloss finish.

Description:

Military Coatings are now available in an Aerosol Can. Military CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our Military CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

Military colors provide superior coverage and are exceptionally easy to apply.

They can be used as a Basecoat for our Custom Range or just as they are.

To get the best result from Military CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Military Colors:

• Battleship Grey
• Black Shadow 
• Blood Stripe
• Brown Leather
• Dark Tan
• Delta Grey
• Destroyer Grey
• Federal Yellow
• Ghost Grey
• Jungle
• Navy Blue
• Olive Drab
• Sand Dune
• Storm White 
  
• Swamp Green

Application:

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Can for 5-10 minutes.
• Apply 2-3 coats of Military color leaving 5-10 minutes between coats. Leave for 30 minutes before applying the effect color or Clearcoat.
• Apply our 2K Clearcoat CANZ for a Real Deep Gloss finish.

Description:

Custom Paints award winning Sparkle Pearl Coatings are now available in an Aerosol Can. Sparkle Pearl CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our Sparkle Pearl CANZ can save on time and labor with no paint mixing or Spray Gun cleaning. 

Our Sparkle Pearls are the very best on the planet. Sparkle Pearls exhibit the brightest and most vivid colors due to their large size and give a sparkle effect in bright light/sunlight. Sparkle Pearls are like no other pearls on the market as each color gives off colors within the color pearl. Apply Sparkle Pearls over any Basecoat color to produce a real custom effect.

To get the best result from Sparkle Pearl CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

CANZ Performance:

• High Performance 1 component Finishes
• Excellent Hardness, Chemical Resistance & Flexibility
• Suitable for use on a wide range of Plastics including HIPS, ABS, ABS/PC, PC, PVC, as well as suitable pre-treated metals
• Ideal as 1 Coat Finishes for a variety of end uses including Automotive, Electronics, Household Goods, etc.
• Used as Basecoat under 1 & 2 component Clearcoat including Ultra Violet Cured
• Suitable for use with Cubic Printing Process

Sparkle Pearl Colors:

There are 9 Custom Sparkle Pearl colors:

• Silver Sparkle Pearl
• Gold Sparkle Pearl
• Green Sparkle Pearl
• Blue Sparkle Pearl
• Purple Sparkle Pearl
• Copper Sparkle Pearl
• Turquoise Sparkle Pearl
• Red Sparkle Pearl
• Rainbow Sparkle Pearl
• Black Diamond 

Application:

Sparkle Pearl Coatings are easy to apply. For best results, use a Black Basecoat but using different colors will give you a real custom effect. Sparkle Pearls can also be applied over our other Liquid, Spectracoat, Pearl and Flip Paint to get a true custom effect.

• Always spray test panels before spraying you product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Can for 5 minutes.
• Apply 2-3 coats of Base color leaving 5-10 minutes between coats. Leave for 30 minutes before applying the Sparkle Pearl effect color.
• Apply 2-5 coats of Sparkle Pearl depending on the effect you desire. Leave 5-10 minutes between coats.
• Apply our 2K Clearcoat CANZ for a Real Deep Gloss finish.

Description:

Alien Glow Coatings are now available in an Aerosol Can. Alien Glow is a glow in the dark paint. This is clearly the best Glow in the Dark paint available with outstanding after glow of up to 24 hours!

To get the best result from Alien Glow CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

CANZ Performance:

• High Performance 1 component Finishes
• Excellent Hardness, Chemical Resistance & Flexibility
• Suitable for use on a wide range of Plastics including HIPS, ABS, ABS/PC, PC, PVC, as well as suitable pre-treated metals
• Ideal as 1 Coat Finishes for a variety of end uses including Automotive, Electronics, Household Goods, etc.
• Used as a Basecoat under 1 & 2 component Clearcoats including Ultra Violet Cured
• Suitable for use with Cubic Printing Process

Alien Glow Colors:

• Blue
• Green

Application:

Alien Glow Coatings are easy to apply and for best results use a White Basecoat.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Can for 5-10 minutes.
• Apply 2-3 coats of Base color leaving 5-10 minutes between coats. Leave for 30 minutes before applying the Alien Glow effect color.
• Apply 3-5 wet coats depending on the Alien Glow effect you desire. Leave 5-10 minutes between coats.
• Apply our 2K Clearcoat CANZ for a Real Deep Gloss finish.

Description:

Custom Paints award winning Lumo is now available in an Aerosol Can. Lumo CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our Lumo CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

Lumo brings you the brightest custom paint finish. Lumo Paint is a high visibility Fluorescent Coating in daylight and artificial light. Please remember to pick your application of this product carefully, it has limited lightfastness. USE WITH DISCRETION.

To get the best result from Lumo CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Lumo Colors:

• Green Lumo
• Orange Lumo
• Pink Lumo
• Red Lumo
  
• Yellow Lumo

Application:

Lumo Coatings are easy to apply. For best results use a White Basecoat. Please remember to pick your application of this product carefully, it has limited lightfastness. USE WITH DISCRETION.

• Always spray test panels before spraying your product or project.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)

• Shake Custom Aerosol Can for 5 minutes.

• Apply 2-3 coats of Basecoat leaving 5-10 minutes between coats. Leave for 60 minutes before applying the Lumo effect color.
• Apply 2-5 coats of Lumo effect color. Leave 5-10 minutes between coats.
• Apply our 2K Clearcoat CANZ for a Real Deep Gloss finish.

Description:

Passion Coatings are now available in an Aerosol Can. Passion CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our Passion CANZ can save on time and labor with no paint mixing or Spray Gun cleaning. 

Passion brings you a smooth free flowing color change (Flip Paint) unlike any other coating seen before. For the most dramatic effect, Passion is applied over a Black Basecoat but it can be applied over a lighter Basecoat for a softer iridescent look yet still intense color change. The color possibility is endless and brings a new dimension to your product.

To get the best result from Passion CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Passion Colors:

• Blue Passion - Shifts from Turquoise to Blue to Purple
• Desert Passion - Shifts from Pinky Red to Gold to Green
• Green Passion - Shifts from Green Turquoise to Bright Silver to Red to Gold
• Kiwi Passion - Shifts from Green to Silver to Red to Orange
• Purple Passion - Shifts from Strong Purple to Silver to Green to Blue
  
• Tropical Passion - Shifts from Gold to Silvery Green to Deep Blue

Application:

Passion Coatings are easy to apply. For best results, use a Black Basecoat but using different colors will give you a real custom effect. Passion colors can also be applied over our Candy, Spectracoat, Sparkle Pearl and Flip Paints to get true custom effect.

• Always spray test panels before spraying your product or project.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
  
• Shake Custom Aerosol Can for 5-10 minutes.
• Apply 2-3 coats of Base color leaving 5-10 minutes between coats. Leave for 30 minutes before applying the Passion effect color.
• Apply 3-5 coats of Passion depending on the effect you desire. Leave 5-10 minutes between coats.
• Apply our 2K Clearcoat CANZ for a Real Deep Gloss finish.

Description:

Custom Paints award winning Pearl Coatings are now available in an Aerosol Can. Pearl CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our Pearl CANZ can save on time and labor with no paint mixing or Spray Gun cleaning. 

Our Pearls exhibits the brightest and most vivid colors. Apply our Pearls over any Base color to produce a true custom effect.

To get the best result from Pearl CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

CANZ Performance:

• High Performance 1 component Finishes
• Excellent Hardness, Chemical Resistance & Flexibility
• Suitable for use on a wide range of Plastics including HIPS, ABS, ABS/PC, PC, PVC, as well as suitable pre-treated metals
• Ideal as 1 Coat Finishes for a variety of end uses including Automotive; Electronics, Household Goods, etc.
• Used as Basecoat under 1 & 2 component Clearcoat including Ultra Violet Cured
• Suitable for use with Cubic Printing Process

Pearl Colors:

• Blue Pearl
• Gold Pearl
  
• Green Pearl
• Indigo Pearl
  
• Magenta Pearl
• Orange Pearl
• Purple Pearl
  
• Red Pearl
  
• Silver Pearl
  
• Turquoise Pearl

Application:

Pearl Coatings are easy to apply. For best results, use a White Basecoat but using different colors will give you a real custom effect. Pearl CANZ colors can also be applied over our other Liquid, Spectracoat, Sparkle and Flip Paints to get a true custom effect.

• Always spray test panels before spraying you product or project.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)

• Shake Custom Aerosol Can for 5 minutes.
• Apply 2-3 coats of Base color leaving 5-10 minutes between coats. Leave for 30 minutes before applying the Pearl effect color.
• Apply 2-5 coats of Pearl depending on the effect you desire. Leave 5-10 minutes between coats.
• Apply our 2K Clearcoat CANZ for a Real Deep Gloss finish.

Description:

Rainbow XL Coatings are now available in an Aerosol Can. They are based on a unique pigment that sparkles and shimmers through the light spectrum when viewed from different angles. Rounded, curved surfaces and sharp angles will highlight the magical appearance of Rainbow XL.

To get the best result from Rainbow XL CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Rainbow XL Colors:

• Fuchsia
• Gold
• Green
• Pink
  
• Red
• Sapphire
  
• Silver
• Starlight
• Violet

Application:

Rainbow XL Coatings are easy to apply. For best results, use a Black Basecoat but using different colors will give you a real custom effect. Rainbow XL colors can also be applied over our Candy, Spectracoat, Sparkle Pearl and Flip Paints to get true custom effect.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Can for 5-10 minutes.
• Apply 2-3 coats of Base color leaving 5-10 minutes between coats. Leave for 30 minutes before applying the Rainbow XL effect color.
• Apply 2-5 wet coats of Rainbow XL depending on the effect you desire. Leave 5-10 minutes between coats. 
• Apply our 2K Clearcoat CANZ for a Real Deep Gloss finish.

Description:

Shimmer Coatings are now available in an Aerosol Can. Shimmer is a unique coating that has a tremendous sparkling effect in a bright light, but in normal light will give you a subtle metallic look. Shimmer is easily applied by normal spraying equipment but can also be sprayed with an airbrush. Apply Shimmer over any color Basecoat for novel effects, but also mixing different Shimmer colors will give you a real custom effect. Apply our Candy colors over the top of Shimmer to give a real "pop" to the Candy effect.

To get the best result from Passion CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Passion Colors:

• Blue Shimmer
• Gold Shimmer
• Green Shimmer
• Purple Shimmer
• Red Shimmer
• Silver Shimmer

Application:

Shimmer is easy to apply and can even be applied with an airbrush. Apply Shimmer over any color Basecoat, but for great results use over a Black Basecoat. Shimmer colors can also mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

• Always spray test panels before spraying you product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Mix Shimmer 2-1 with Reducer and stir well.
• Apply 2-5 WET coats of Shimmer depending on the effect you desire. 
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Spectrum FX CANZ:

Specialist Paints award winning Coatings are now available in a Aerosol Can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time & labor with no paint mixing or Spray gun cleaning. The CANZ range comes in a 13.5oz Aerosol can.

Spectrum FX Colors:

Spectrum FX Custom paints are based on a unique pigment that sparkle and shimmer through the light spectrum when viewed from different angles, rounded curved surfaces and sharp angles will highlight the magical appearance of Rainbow XL.

Available in Silver

Application:

Spectrum FX coatings are easy to apply and for best results use a Black base coat but using different colors will give you a real custom effect. Spectrum FX CANZ colors can also be applied over our other Candy, spectracoat, Sparkle, flip paint to get true custom effect.

(Always spray test panels before spraying you product or project)

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Can for 5-10 minutes.
• Apply 2-3 coats of base color leaving 5-10 minutes between coats. Leave for 30 minutes before applying the Spectrum FX effect color.
• Apply 1-4 coats depending on the Spectrum FX effect you desire. Leave 5-10 minutes between coats.
• For best results we suggest to apply our 2K Clear-coat Aerosol CANZ

Spectracoat Aerosol Cans:

Our award winning Spectracoat are available in a Aerosol can. Our Aerosol cans give high output with excellent atomization and high transfer efficiency with no pressure drop during application. Using our aerosol cans saves you time & labor with no paint mixing or Spray gun cleaning.

To get the best result from our Spectracoat aerosol cans we recommend using our 2K CLEAR-COAT CANZ.There the best 2k aerosol can on the market!!

Spectracoat is a Prismatic tidal wave which creates alluring 3D iridescent colors that appear to move right before your eyes! Spectracoat looks like liquid silver in low light and a flowing liquid silver rainbow in bright light. rounded curved surfaces and sharp angles will highlight the magical appearance of Spectracoat. ( flip paint )

Spectracoat colors:

• Spectracoat Silver.
• Spectracoat Pink.
• Spectracoat Blue.
• Spectracoat Purple.
• Spectracoat Green.
• Spectracoat Black.
• Spectracoat Light Pink.
• Spectracoat Light Blue.
• Spectracoat Light Purple.
• Spectracoat Light Green.
• Spectracoat Gunmetal.
• Spectracoat Gold.
• Spectracoat Red
• Spectracoat Yellow.

Spectracoat Application:

Spectracoat are easy to apply and can even be applied by a airbrush. Apply a Spectracoat over any color base coat. Spectracoat colors can also be mixed with our other products i.e. Candy, Sparkle Pearl, Pearl, flip paint for a real custom effect.

(Always spray test panels before spraying you product or project)

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Can for 3-5 minutes.
• Apply 2-3 coats of Base color leaving 5-10 minutes between coats. Leave for 60 minutes before applying the Spectracoat color or Clear-coat.
• For best results we suggest to apply our 2K Clear-coat Aerosol CANZ

Description:

Shadow Chrome is now available in an Aerosol Can. Shadow Chrome produces the most realistic Metallic Paint finishes available. Anyone can reproduce the authentic look of real metal in minutes. Shadow Chrome can be found on a variety of OEM applications ranging from Alloy wheels to interior components.

To get the best result from Shadow Chrome CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Shadow Chrome Coatings are easy to apply. For best results, use a Black Basecoat but using a Silver, Grey or White Basecoat will give you a different shade of Shadow Chrome. Also applying Shadow Chrome over a Gloss will give a more reflective effect.

• 1st Step if you've never sprayed this product is to do test samples, or call our help line and get guidance to apply this product correctly, as this will not be sprayed the same as a regular base coat paint.

• Always spray test panels before spraying you product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Can for 3-5 minutes.
• Apply 2-3 coats of Base color leaving 5-10 minutes between coats. Leave for 60 minutes before applying the Shadow Chrome effect color.
• Apply 2-4 light coats of Shadow Chrome depending on the effect you desire. Leave 5-10 minutes between coats.
• Apply our 2K Clearcoat CANZ for a Real Deep Gloss finish.

Description:

Intercoat Clear is now available in an aerosol can. Intercoat Clear can be used as a protective intermediate clearcoat for tape outs and protecting art work.